|
|
|
SBC-iGLX
Board
|
|
|
With front panel
|
Bottom view
|
With enclosure
|
| SBC-iGLX Highlights |
 |
Single
Board Computer implemented by the combination of a CM-iGLX
module and SB-iGLX baseboard |
|
Available in two
form-factors:
- Standard PC/104+
- PC/104+ with front panel |
|
AMD
Geode LX CPU @ 500 MHz, 512
MB SDRAM, 512 MB Flash
Disk |
|
SXGA
graphics controller with connectors for a LCD panel
and CRT monitor |
|
WLAN
/ WiFi 802.11g Interface |
|
Video
input and encoder |
|
PCI and
ISA bus
expansions in PC/104+ format |
|
Two
serial ports with RS232 / RS485 / RS422
/ TTL driver options |
|
Host
USB ports,
including keyboard & mouse support |
|
Touchscreen
interface |
|
Hard
disk interface |
|
Sound I/O
|
|
Single or dual
100 Mbps Ethernet ports |
|
CardBus slots |
|
CANbus
interface |
|
RTC with
lithium battery
|
|
Switched
power supply for telecom and automotive applications, 3.3V to 48V
operating range |
|
Also available with enclosure,
implementing complete tiny PC |
| |
| Note:
some of above specified features are optional |
|
The SBC-iGLX
is a standard PC/104+ compliant, single board computer. It is
implemented by a CM-iGLX module providing most
of the functions, and a SB-iGLX carrier board providing connectors and
several additional functions. The rich feature set of the SBC-iGLX is customizable according to the price / performance targets of
the user's application.
The unique mechanical design of the SBC-iGLX
allows selecting between two popular form factors: either the standard
PC/104+ with headers, or an extended PC/104+ with front panel connectors.
The SBC-iGLX contains PC/104+ expansion
connectors which open it to the wide range of standard peripheral
cards. Furthermore, the SBC-iGLX contains an electrical interface and
slots for CardBus extension cards, which may be
inserted and secured in
the slot with no additional mechanical means, extending the system with
capabilities such as a larger solid state disk, GPS or GSM modem.
For more information, see Developer
Resources page.
|
Block Diagram
SBC-iGLX
Features
The "SB Option" column
specifies the P/N code of the SB-iGLX carrier board required to have the particular
feature. The "CM Option" column
specifies the P/N code of the CM-iGLX required to have the particular
feature. SBC-iGLX content is the combination of features provided
by the attached CM-iGLX and the features implemented on the SB-iGLX.
To have a particular feature, both the CM and SB options of that
feature must be implemented.
"+" means that the feature is always available, regardless
of P/N code.
| Feature |
Specification |
SB
Option |
CM
Option |
CPU
SDRAM
Flash Disk |
See Feature List of CM-iGLX
module |
|
|
| COM-A |
Rx/Tx only, RS-232 levels, RJ11
or DB9 connector |
+ |
+ |
| COM-B |
Rx/Tx only, RS-232/422/485 levels,
100-mil header |
X |
+ |
| IDE |
UDMA ATA-100 interface. 40-pin FPC
connector. |
+ |
+ |
| Ethernet |
One or two 10/100 Mb Ethernet
ports, using Realtek RTL8139:
- 1st port from CoM
- 2nd port from the baseboard
RJ-45 connector and activity LED's provided in two options:
- From baseboard's front panel
- Through FPC and optional extension module |
+
E2
F1
+ |
E
E |
| TFT Panel |
TFT (digital RGB) panel interface. 51-pos FPC connector for
direct interface to certain TFT panels |
+ |
+ |
| LVDS Panel |
LVDS panel interface, through 100-mil
header |
L |
+ |
| CRT Monitor |
Analog RGB
interface for CRT and FP monitors, through DB15 on
the front panel or through FPC and optional module |
+ |
+ |
| Video Input |
Using SAA7113 video input processor |
V |
+ |
| GPIO |
up to 8 lines, on common 100-mil
header |
+ |
+ |
| PCMCIA & CardBus |
Slots
with card guides, based on PCI1520 controller. Supports PCMCIA (16-bit)
or CardBus (32-bit) standards, and card types I, II and III |
C1
C2 |
+
+ |
| Host USB |
Three USB Host ports, 480 Mbps. Header for
Type-A cable/ connector. Two ports on front panel |
+ |
+ |
Sound I/O
Touchscreen |
Wolfson WM9715L controller supporting
distinct audio and touchscreen functions. Header for standard
cable/connectors for Microphone
(mono), Line input and Speakers (stereo). Touchscreen controller for resistive panels,
pins on 100-mil header. |
+ |
AT |
| PC104 |
Standard PC/104 connector and signals.
Implemented using IT8888 PCI-ISA bridge |
P |
+ |
| PC104+ |
PCI bus through
standard PC/104+ connector |
R |
+ |
| RTC Battery |
Real time clock operated
from on-board lithium battery |
+ |
+ |
| CAN Bus |
CAN Bus controller and
driver with galvanic isolation and DC separation |
W |
+ |
Electrical,
Mechanical and Environmental Specifications
| Supply Voltage |
High efficiency switched power supply.
Support of sleep mode.
Two supply options:
- Regulated 3.3V or 5.0V (3.3V valid only if module doesn't contain "A"
option)
- Unregulated 12V to 48V, for telecom and automotive applications |
| Power Consumption |
3W to 6W in full activity,
depending on CPU speed and selected features
Below 200 mW in sleep mode |
| Dimensions |
Without front panel - 96 x 91 mm
With front panel - 111 x 91 mm
Height ranges from 10 mm to 22 mm, depending on the
connectors assembled. The height specified includes the CM-iGLX module. |
| Operation temp (case) |
| Commercial: |
0o to 70o C |
| Extended: |
-20o to 70o
C |
| Industrial: |
-40o to 85o C. Click for availability
note |
|
| Storage
temperature |
-40o to 85o
C |
| Relative
humidity |
10% to 90% (operation)
05% to 95% (storage) |
| Shock |
50G / 20 ms |
| Vibration |
20G / 0 - 600 Hz |
| MTBF |
> 100,000 hours |
For more information see:
- SB-iGLX Reference Guide
- Developer Resources
|
