|
|
|
EM-X270 - Embedded Mobile
Device
| EM-X270
Highlights |
-
Full-featured
handheld computer board for embedded applications
-
Price
starting from $122
-
Intel's
XScale PXA270 CPU, up to 520 MHz, 32+32 KB
cache, WMMX
-
128 Mbyte
SDRAM
-
512 Mbyte Flash Disk
-
Cellular
voice and GPRS modem
-
Integrated
3.5" 480 x 640 VGA display with touchscreen (optional)
-
Graphics controller
supporting STN
and TFT panels with 800
x 600 max resolution
see
LCD panel support
-
WiFi 802.11b
interface
-
Bluetooth
interface
-
GPS
receiver, Sirf-III chipset
-
Expansion
connector
-
Camera
Interface
-
SD
/ SDIO / MMC socket
-
Sound codec with
integrated speaker and microphone
-
Slave and host USB
port, serial port, GPIO's
-
Main
and backup batteries, and battery charger
-
Very
low standby and active power consumption
-
Size -
97 x 66 mm
|
EM-X270
is a full-featured computer board, designed specifically for handheld /
mobile implementations. Its functional contents are similar to the latest
generation of Pocket PC's and smartphones, including all types of
wireless, satellite and cellular connectivity found in today's
state-off-the-art mobile devices. Yet, it is designed to serve custom
implementations, retaining the flexibility expected from an embedded
computer board. Available with an optional display, battery with
charger
and keypad, the EM-X270 offers a self-contained solution requiring just
an enclosure for implementing the final custom product. The feature set of the
EM-X270 board combines a
32-bit CPU, SDRAM, Flash Disk and vital computing peripherals. On-board
wireless interfaces include WiFi, Bluetooth, GPS and cellular
Voice/GPRS modem. The last interface enables the device to act
essentially as a customized cellular phone.
EM-X270 has several connectors and
slots as used in PDA's and also an internal extension connector for
application-specific add-on's. Ready-to-run Windows CE and Linux
packages are available from CompuLab.
See O/S Support Coverage Map
For more information,
see Developer
Resources page
|
Block Diagram

EM-X270
Features
"Option" column
specifies the configuration code required to have the particular
feature.
"+" means that the feature is available always.
CPU, Memory and Busses
| Feature |
Specifications |
Option |
| CPU |
Intel XScale PXA270, 312 / 520 MHz, WMMX
32 KB I-cache and 32 KB D-cache, WB, 128 MB address space
DMA and Interrupt controllers,
Timers |
C |
| RAM |
128 MB, SDRAM, 100 MHz,
32-bit |
+ |
| NAND Flash Disk |
512 Mbytes, more in future. |
+ |
| External local bus |
32-bit data, 26-bit address,
variable rate up to 100
MHz |
+ |
Peripherals
| Feature |
Specifications |
Option |
GPRS / GSM
and cellular phone |
Telit GE864 module. GSM 850, 900, DCS 1800 or PCS
1900 network communication services. GPRS Class 10, Voice, Circuit
Switched Data transfer, Fax, Phone-book and SMS. On-board SIM card
socket. Connector for external antenna |
K |
| Bluetooth |
Bluetooth V2.0+EDR system. CSR BlueCore4-ROM chipset,
2.4GHz band, up to 3Mbps. On-board ceramic chip antenna and connector
for external antenna |
+ |
| WiFi
Interface |
Implements 802.11b
wireless connectivity standard.
Philips BGW200 chipset, 11 Mbps, 2.4 GHz band.
On-board antenna and connector for external antenna |
W |
| GPS |
NAVMAN Jupiter32 receiver module, Sirf-III
chipset. Supports the NMEA
data messages protocol. Connector for external antenna |
H |
| Graphics
Controller |
4/8/16 bit color, TFT / STN,
resolution up to 800 x 600 x 16 |
+ |
| Camera Interface |
Direct camera sensor support, max
resolution 2048 x 2048.
30 fps @ 320x240, 15 fps @640x480 |
+ |
| USB |
One USB Host/Slave port,
12 Mbps, 24-endpoints, OHCI v1.1 |
+ |
| Serial Port (UART) |
16550 compatible,
max 921 kbps, RS232, full modem |
+ |
| General
Purpose I/O |
Up to 16 dedicated lines. Can also be used as interrupt
inputs. Shared with keypad interface |
+ |
| Audio codec |
Wolfson WM9715L, AC97 interface.
On-board microphone and speaker connectors, and external audio
jack |
+ |
| Touchscreen ctrl. |
A part of the Wolfson WM9715L chip. Supports
resistive touch panels |
+ |
| SD / MMC socket |
Supports Multimedia Card, Secure Digital and Secure
Digital I/O communications protocols. Data-transfer rates up to 19.5
Mbps for MMC and 1-bit SD/SDIO, and up to 78 Mbps for 4-bit SD/SDIO
transfers |
+ |
| RTC |
Real Time Clock,
uninterrupted power supply |
+ |
Electrical,
Mechanical and Environmental Specifications
| Battery charger |
Charger for board's lithium polymer
battery. The power is supplied from a 5V source via the USB connector. |
| Active
consumption |
All contents, excluding GPRS: 0.2 - 2
W. GPRS: 1-2 W |
| Sleep
consumption |
10 - 20 mW, depending on
configuration and mode |
| Dimensions |
97 x 66 mm. Height:
board - 6 mm, LCD - 5 mm, battery - 6 mm |
| Weight |
Board - 40 gram, LCD - 45 gram, battery
- 60 gram |
| MTBF |
> 100,000 hours |
Operation
temperature
(specified for board only)
(on component case) |
| Commercial: |
0o to 70o C |
| Extended: |
-20o to 70o
C |
| Industrial: |
-40o to 85o C. Click for availability
note |
|
| Storage
temperature |
-40o to 85o
C |
| Relative
humidity |
10% to 90% (operation)
05% to 95% (storage) |
| Shock |
50G / 20 ms |
| Vibration |
20G / 0 - 600 Hz |
Off-board Devices
| LCD Panel |
TPO/Philips TD035STEE1 - 3.5" TFT, 480
x 640 VGA, 16-bit parallel RGB interface, transflective, LED backlight,
integrated touchscreen, below 1W consumption |
| Battery |
Lithium polymer,
97 x 55 x 6 mm, 10 W/h. Designed for 8-10 hours of continuous
operation under normal conditions |
| Keypad |
|
For more information see:
- EM-X270
Reference Guide
- Developer Resources
|