|
|
|
SBC-X270
Board
Mature
product, not for new designs. Discontinued features are colored in
gray.
|
|
|
|
With
CM-X270W
& front panel
|
Without front panel
|
Bottom view
|
With cables
|
| SBC-X270 Highlights |
 |
Single
Board Computer implemented by combination of CM-X270
module and SB-X270 baseboard. Compatible with both X270W and X270L module version. |
|
Available in two form-factors:
- Standard PC/104+
- PC/104+ with front panel |
|
Price
starting below $120 |
|
Intel's XScale
PXA270 CPU @ 520 MHz, 128 MB SDRAM, 512 MB Flash
Disk |
|
WLAN
/ WiFi 802.11b/g Interface |
|
VGA
graphics controller with connectors for LCD panel
and CRT monitor |
|
Video
input |
|
PCI and Local Bus
expansions in PC/104+ format |
|
COM1 - 4 with RS232 / RS485 / RS422
/ TTL driver options |
|
Host and slave USB ports
including keyboard & mouse support |
|
Touchscreen
interface |
|
Hard
disk interface |
|
Sound I/O
|
|
Single or dual
100 Mbps Ethernet ports |
|
PCMCIA,
CardBus & MMC/SDIO slots |
|
RTC with
lithium battery
|
|
Switched
power supply for telecom and automotive applications, 3.3V to 48V
operating range |
| |
| Note:
some of above specified features are optional |
|
The SBC-X270
is a standard PC/104+ compliant, single board computer. It is
implemented by CM-X270 module providing most
of the functions, including an integrated wireless LAN (WiFi)
interface. The SB-X270 carrier board providing connectors and
several additional functions. The rich features set of the SBC-X270 is customizable according to the price / performance targets of
the user's application.
The unique mechanical design of the SBC-X270
allows selecting between two popular form factors: either standard
PC/104+ with headers, or extended PC/104+ with front panel connectors.
The SBC-X270 contains PC/104+ expansion
connectors which open it to the wide range of standard peripheral
cards. Furthermore, the SBC-X270 contains a electrical interface and
slots for PCMCIA, CardBus and MMC/SDIO extension cards, which may be
inserted and secured in
the slot with no additional mechanical means, extending the system with
capabilities such as a larger solid state disk, GPS or GSM modem.
For more information, see Developer
Resources page.
|
Block Diagram
SBC-X270
Features
The "SB Option" column
specifies the P/N code of SB-X270 carrier board required to have the particular
feature. The "CM Option" column
specifies the P/N code of CM-X270 required to have the particular
feature. SBC-X270 content is the combination of features provided
by the attached CM-X270 and the features implemented on the SB-X270.
To have the particular feature, both the CM and SB options of that
feature must be implemented.
"+" means that the feature is always available, regardless
of P/N code.
| Feature |
Specification |
SB
Option |
CM
Option |
CPU
SDRAM
Flash Disk |
See Feature List of CM-X270
module |
|
|
| COM-A |
Full modem controls, RS-232 levels, RJ11
or DB9 connector |
+ |
+ |
| COM-B |
Rx/Tx , RS232 & TTL levels, on 100-mil
header |
+ |
B |
| COM-C |
Full modem, RS 232/422/485 levels,
standard 10-pin header |
+ |
+ |
| COM-D |
Rx/TX, RS-232 & TTL levels, on
100-mil header |
X |
+ |
| IrDA |
SIR and FIR modes. Shared with COM-D |
+ |
+ |
| IDE |
PIO mode. Derived from local bus.
Standard 40-pin header |
+ |
+ |
| Ethernet |
One or two 10/100BaseT Ethernet
ports:
1. Module's port - DM9000, local bus interface
2. Baseboard port Realtek RTL8139 controller PCI interface
RJ-45 connector and activity LED's provided in two options:
- From baseboard's front panel
- Through FPC and optional extension module |
+
E2
F1
+ |
E
E,B |
| LCD Panel |
STN and TFT panel support. 51-pos FPC connector for
direct interface to certain TFT panels |
L |
+ |
| CRT Monitor |
RGB signals are derived
from the TFT interface by using DAC's. Interface through DB15 on
the front panel or through FPC and optional module |
M |
+ |
| GPIO |
9 to 14 lines, on common 100-mil header. |
+ |
+ |
| PCMCIA & CardBus |
Slots
with card guides, for card types I, II and III. Two options:
- One slot for PCMCIA / CompactFlash (16-bit) card.
- Two slots - for one PCMCIA and one CardBus (32-bit) cards |
C1
C2 |
+
B |
| Host USB |
Two (default) or four (with
"B" option) Host ports, 12 Mbps. Header for
Type-A cable/ connector. Two ports on front panel. |
+ |
+ |
| Slave USB |
Slave port shared with USB3 host, 12 Mbps. |
+ |
+ |
| Touch Panel |
UCB1400 controller for resistive panels,
pins on 100-mil header |
+ |
AT |
| Sound I/O |
Header for standard
cable/connectors for Microphone
(mono), Line input and Speakers (stereo) |
+ |
A |
| PC104 |
Standard PC/104 connector. Signals
are derived from CPU's local
bus through buffers. 20 bit address. No DMA Support.
|
P |
+ |
| PC104+ |
PCI bus through
standard PC/104+ connector |
R |
B |
| RTC Battery |
Real time clock operated
from on-board lithium battery |
+ |
R |
| LPC bus |
LPC bus on common 100-mil
header |
+ |
B |
| WiFi Interf. |
WLAN / WiFi including
connectors, provided by CM-X270 |
+ |
W |
Electrical,
Mechanical and Environmental Specifications
| Supply Voltage |
High efficiency switched power supply.
Support of sleep mode.
Three supply options:
- Regulated 3.3V (valid only when module doesn't contain "A"
option)
- Regulated 5.0V
- Unregulated 12V to 48V, for telecom and automotive applications |
| Power Consumption |
2W to 5W in full activity,
depending on CPU speed and selected features
Below 50mW in sleep mode |
| Dimensions |
Without front panel - 96 x 91 mm
With front panel - 111 x 91 mm
Height ranges from 10 mm to 22 mm, depending on the
connectors assembled. Height specified includes the CM-X270 module. |
| Operation temp (case) |
| Commercial: |
0o to 70o C |
| Extended: |
-20o to 70o
C |
| Industrial: |
-40o to 85o C. Click for availability
note |
|
| Storage
temperature |
-40o to 85o
C |
| Relative
humidity |
10% to 90% (operation)
05% to 95% (storage) |
| Shock |
50G / 20 ms |
| Vibration |
20G / 0 - 600 Hz |
| MTBF |
> 100,000 hours |
For more information see:
- SB-X270 Reference Guide
- Developer Resources
|
