Designed to bring out the full capabilities of the i.MX93 SoC, UCM-iMX93 provides up-to 2GB RAM and 64GB eMMC, Gbit Ethernet, RGMII, 2 USB ports, 2 CAN-FD, 7 UARTs and up-to 79 GPIOs. Display connectivity is supported with LVDS and MIPI-DSI. Measuring just 28 x 38 mm, UCM-iMX93 also features on-board WiFi 802.11ac and Bluetooth 5.3 interfaces. UCM-iMX93 is offered with full industrial temperature range of -40C to 85C.
Excellent connectivity, low cost and small size make UCM-iMX93 a versatile solution for many applications such as building and industrial control, medical devices, IoT gateways and measurement equipment.
UCM-iMX93 is provided with a full BSP and ready-to-run images for the Linux operating system.
The UCM-iMX93 BSP includes Linux kernel 5.15.71, Yocto Project SDK and U-Boot boot-loader.
To facilitate streamlined and rapid product development, UCM-iMX93 is provided with SB-UCMIMX93 carrier board and EVAL-UCM-iMX93 evaluation kit.
SB-UCMIMX93 carrier-board is designed for easy evaluation of all UCM-iMX93 functions. It also serves as reference for the customer’s carrier-board design, providing proven building blocks for all key interfaces and peripherals. SB-UCMIMX93 schematics, bill of materials and layout are available.
EVAL-UCM-iMX93 evaluation kit includes UCM-iMX93 and SB-UCMIMX93 hardware set, 5” WXGA LCD panel, PSU, cables and engineering technical support.
CPU | NXP i.MX9352, dual-core ARM Cortex-A55, 1.7GHz |
NPU | Arm® Ethos U-65 microNPU |
Real-Time MCU | ARM Cortex-M33 |
RAM | Up-to 2GB LPDDR4 |
Storage | Up to 64GB of soldered eMMC |
Display | MIPI-DSI, 4 data lanes, up to 1920 x 1080 @60Hz |
LVDS, 4 lanes, up to 1366 x 768 p60 | |
Camera | MIPI-CSI, 2 data lanes |
Audio | Up-to 2x I2S / SAI |
Network | 2x Gigabit Ethernet / RGMII |
Pre-certified 802.11ac WiFi | |
Bluetooth 5.3 BLE | |
USB | 2x USB2.0 dual-role ports |
UART | Up-to 7x UART |
CAN bus | Up-to 2x CAN-FD |
General I/O | Up-to 2x SDIO, 6x I2C, 7x SPI, 6x PWM, 79x GPIO |
Debug | JTAG debug interface |
Supply Voltage | 3.45V to 4.4V |
Connectors | 2 x 100 pin, 0.4mm pitch |
Dimensions | 28 x 38 x 4 mm |
Temp. range | -40C to 85C |
UCM-iMX93 is now available through CompuLab’s worldwide distribution channels and through direct sales (www.compulab.com).
UCM-iMX93 is offered in a variety of configurations starting from $39 for volume orders.
EVAL-UCM-iMX93 evaluation kit is offered at $385.
Detailed ordering and pricing information is available on the UCM-iMX93 product page.
CompuLab is a leading designer and manufacturer of embedded computing products since 1992.
CompuLab products are used in digital signage, telecommunication, industrial automation, gaming, medical devices, aerospace and marine systems and countless other applications.
CompuLab headquarters are located in Yokneam, Israel with offices in St. Petersburg, FL.
For additional details please contact:
Igor Vaisbein
igor.vaisbein@compulab.co.il
+972-4-8290100
IOT-GATE-IMX8PLUS provides a wide range of wireless and wired interfaces required in typical IoT control and monitoring applications:
IOT-GATE-IMX8PLUS has been designed to address the requirements of IoT integration in industrial environments:
Each IoT project presents different connectivity requirements that cannot be addressed with a single hardware configuration. In addition to configurable RAM, storage and wireless options, CompuLab’s modular I/O design enables IOT-GATE-IMX8PLUS to provide any combination of up-to 3x RS485 / RS232 ports and optional digital I/O.
IOT-GATE-IMX8PLUS functionality can be extended even further with custom, application specific I/O expansion boards.
IOT-GATE-IMX8PLUS is provided with ready-to-run Debian Linux with built-in Docker support and easy-to-use deployment tools, allowing customers to focus on application development.
Customers who prefer to configure a custom O/S image can leverage the IOT-GATE-IMX8PLUS Yocto BSP which includes Linux kernel 5.15, Yocto Project 4.0 and U-Boot boot-loader.
In addition, IOT-GATE-IMX8PLUS supports popular IoT frameworks such as Docker, Microsoft Azure IoT and Node-RED.
OTA updates can be integrated using a pre-configured Mender layer.
For projects that require custom housing with simple integration, IOT-GATE-IMX8PLUS is also offered without the enclosure – as SBC-IOT-IMX8PLUS.
Customers that require a radically customized form-factor or functionality can leverage IOT-GATE-IMX8PLUS for development and quick proof-of-concept and then make a seamless transition to a fully custom design with the UCM-iMX8M-Plus System-on-Module, while benefiting from proven hardware and existing software stack.
CPU | i.MX8M Plus, quad-core ARM Cortex-A53, 1.8GHz |
RAM | Up to 8GB LPDDR4 |
Storage | Up to 128GB, eMMC flash, soldered on-board |
Network | 2x Gbit Ethernet ports |
WiFi 802.11ax | |
Bluetooth 5.3 BLE | |
LTE cellular modem | |
USB | 2x USB2.0 ports, type-A connectors |
1x USB3.0 port, type-A connector | |
RS485/RS232 | Up-to 3x RS485 (half-duplex) | RS232 ports |
CAN bus | 1x CAN bus port |
Digital I/O | Optional I/O module with 4x digital outputs + 4x digital inputs |
Expansion | Expansion connector for custom add-on boards – LVDS, SDIO, USB, SPI, I2C, GPIOs |
RTC | Real time clock with back-up battery |
Watchdog | Hardware watchdog |
Input voltage | Unregulated 8V to 36V DC input |
Dimensions | 132 x 84 x 25 mm |
Enclosure | Aluminum housing |
Cooling | Passive cooling, fanless design |
Temp. range | -40C to 80C |
IOT-GATE-IMX8PLUS and SBC-IOT-IMX8PLUS are available through CompuLab’s worldwide distribution channel and through direct sales (www.compulab.com).
IOT-GATE-IMX8PLUS is offered at a variety of configurations starting from $146 for volume orders.
SBC-IOT-IMX8PLUS is offered at a variety of configurations starting from $124 for volume orders.
Detailed ordering and pricing information is available at IOT-GATE-IMX8PLUS and SBC-IOT-IMX8PLUS product pages.
CompuLab is a leading designer and manufacturer of embedded computing products since 1992.
CompuLab products are embedded in digital signage, telecommunication systems, automotive devices, gaming systems, medical devices, aerospace and marine systems, and countless other applications.
CompuLab headquarters are located in Yokneam, Israel with offices in St. Petersburg, FL.
Igor Vaisbein
igor.vaisbein@compulab.co.il
+972-4-8290100
CL-SOM-iMX8Plus has been designed to bring out the full capabilities of the i.MX8M-Plus SoC using the CompuLab unified CL-SOM SO-DIMM form-factor. Peripheral interfaces include dual Gigabit Ethernet / RGMII, PCI Express, 2 USB3.0 ports, up-to 4 UARTs, 2 CAN ports and 90 GPIOs. Display connectivity is supported with HDMI, LVDS and MIPI-DSI interfaces. In addition, CL-SOM-iMX8Plus provides on-board pre-certified 802.11ac WiFi and Bluetooth 5.0 interfaces.
CL-SOM-iMX8Plus is offered with full industrial temperature range of -40C to 85C.
CL-SOM-iMX8Plus is provided with a full BSP and ready-to-run images for the Linux operating system. The CL-SOM-iMX8Plus BSP includes Linux kernel 5.10.9, Yocto Project SDK, U-Boot boot-loader and RTOS SDK.
To facilitate streamlined and rapid product development, CL-SOM-iMX8Plus is supported with the SB-iMX8Plus carrier-board and EVAL-iMX8Plus evaluation kit.
SB-iMX8Plus carrier-board is optimized for easy evaluation of all CL-SOM-iMX8Plus functions. It also serves as reference for the customer’s carrier-board design, providing proven building blocks for all key interfaces and peripherals. SB-iMX8Plus schematics, bill of materials and layout are available.
EVAL-iMX8Plus eval-kit offered at $445, includes CL-SOM-iMX8Plus and SB-iMX8Plus hardware set, an LCD panel, PSU, cables and a technical support contract.
CPU | NXP i.MX8M Plus quad-core / dual-core ARM Cortex-A53, 1.8GHz |
Video Decode | 1080p60 HEVC/H.265, AVC/H.264, VP9, VP8 |
Video Encode | 1080p60 HEVC/H.265, AVC/H.264 |
GPU | GC7000UL GPU, OpenGL ES 3.1/3.0, Vulkan, Open CL 1.2 FP, OpenVG 1.1 |
NPU | AI/ML Neural Processing Unit, up to 2.3 TOPS |
Real-Time MCU | ARM Cortex-M7, 800Mhz |
RAM | Up-to 8GB LPDDR4 |
Storage | Up to 128GB of soldered eMMC |
Display | HDMI2.0a, LVDS, MIPI-DSI, up to 1080p60 |
Camera | 2x MIPI-CSI, 4 data lanes |
Network | 2x Gigabit Ethernet / RGMII |
Pre-certified 802.11ac WiFi | |
Bluetooth 5.0 BLE | |
Audio | Up-to 2x I2S / SAI |
PCI Express | 1x PCIe |
USB | 2x USB3.0 dual-role ports |
UART | Up to 4x UART |
CAN bus | Up-to 2x CAN |
General I/O | Up to 6x I2C, 3x SPI, 90x GPIO |
RTC | Real time clock, powered by external battery |
Debug | JTAG debug interface |
Supply Voltage | 3.45V to 4.4V |
Connector | 204-pin SO-DIMM edge connector |
Dimensions | 36 x 68 x 5 mm |
Temp. range | -40C to 85C |
CL-SOM-iMX8Plus is available now through CompuLab’s worldwide distribution channels and through direct sales (www.compulab.com).
CL-SOM-iMX8Plus is offered at a variety of configurations starting from $58 for volume orders.
EVAL-iMX8X evaluation kit is offered at $445.
Detailed ordering and pricing information is available at the CL-SOM-iMX8Plus product page.
CompuLab is a leading designer and manufacturer of embedded computing products since 1992.
CompuLab products are used in digital signage, telecommunication, industrial automation, gaming, medical devices, aerospace and marine systems and countless other applications.
CompuLab headquarters are located in Yokneam, Israel with offices in St. Petersburg, FL.
For additional details please contact:
Igor Vaisbein
igor.vaisbein@compulab.co.il
+972-4-8290100
Targeting industrial control and monitoring applications, IOT-GATE-RPI4 delivers a wide range of interfaces required in typical IoT systems:
IOT-GATE-RPI4 has been specifically designed to address the requirements of IoT integration in industrial environments:
Each IoT project presents different connectivity requirements that cannot be addressed with a single hardware configuration. In addition to configurable RAM, storage and wireless options, CompuLab’s modular I/O design enables IOT-GATE-RPI4 to provide any combination of up-to 4x CAN-FD / RS485 / RS232 ports or digital I/O.
IOT-GATE- RPI4 functionality can be extended even further with custom, application specific I/O expansion boards. For projects that do not require housing, IOT-GATE-RPI4 will also be offered without the enclosure – as SBC-IOT-RPI4.
IOT-GATE-RPI4 runs standard Raspberry Pi OS images and is fully compatible with all Raspberry Pi software.
In addition, IOT-GATE-RPI4 supports popular IoT frameworks such as Microsoft Azure IoT and AWS Greengrass.
CPU | Broadcom BCM2711, quad-core ARM Cortex-A72, 1.5GHz |
RAM | Up to 8GB LPDDR4 |
Storage | Up to 128GB, eMMC flash, soldered on-board |
64GB – 256GB NVME flash, optional module | |
Network | 2x Ethernet ports |
WiFi 802.11ac | |
Bluetooth 5.0 BLE | |
LTE cellular modem | |
USB | 3x USB2.0 ports, type-A connectors |
2x USB3.0 ports, type-A connectors (optional add-on) | |
Industrial I/O | Up-to 4x RS485 (half-duplex) | RS232 | CAN-FD ports |
Digital I/O | Up-to 2x I/O modules each supporting 4x digital outputs + 4x digital inputs |
Expansion | Expansion connector for custom add-on boards – PCIe, USB, SPI, GPIOs |
RTC | Real time clock with back-up battery |
Watchdog | Hardware watchdog |
Input voltage | Unregulated 8V to 36V DC input |
Dimensions | 132 x 84 x 25 mm |
Enclosure | Aluminum housing |
Cooling | Passive cooling, fanless design |
Temp. range | -40C to 80C |
IOT-GATE-RPI4 is available now through CompuLab’s worldwide distribution channel and through direct sales (www.compulab.com).
IOT-GATE-RPI4 is offered at a variety of configurations starting from $134 for volume orders.
Detailed ordering and pricing information is available at the IOT-GATE-RPI4 product page.
CompuLab is a leading designer and manufacturer of embedded computing products since 1992.
CompuLab products are embedded in digital signage, telecommunication systems, automotive devices, gaming systems, medical devices, aerospace and marine systems, and countless other applications.
CompuLab headquarters are located in Yokneam, Israel with offices in St. Petersburg, FL.
Igor Vaisbein
igor.vaisbein@compulab.co.il
+972-4-8290100
* Raspberry Pi is a trademark of the Raspberry Pi Foundation.
]]>“We are immensely proud that NASA chose our products for this outstanding mission where failure is not an option”, said Gideon Yampolsky, CompuLab CEO, “The boards travelled over 100 million miles and are operating on Mars in extreme conditions.
These computer modules were not specifically designed for NASA, but rather these are our standard products. The fact that our standard products are capable of handling that kind of task marks the level of quality and reliability of our design and production.”
For additional details please refer to the Perseverance Cameras and Microphone Engineering.
]]>Targeting industrial control and monitoring applications, IOT-GATE-iMX8 delivers an assortment of wireless and wired interfaces required in typical IoT systems:
IOT-GATE-iMX8 is specifically designed to address the requirements of IoT integration in industrial environments:
Each IoT project presents different connectivity requirements that cannot be addressed with a single hardware configuration. IOT-GATE-iMX8’s highly modular design provides a wide range of different I/O combinations:
IOT-GATE-iMX8 functionality can be extended even further with custom, application specific I/O expansion boards. In addition, customers that require a radically customized form-factor or functionality can leverage IOT-GATE-iMX8 for development and quick proof-of-concept and then make a seamless transition to a fully custom design with the UCM-iMX8M-Mini System-on-Module, while benefiting from proven hardware and existing software stack.
For projects that do not require housing, IOT-GATE-iMX8 is also offered without the enclosure – as SBC-IOT-iMX8.
IOT-GATE-iMX8 is provided with ready-to-run Debian Linux with built-in Docker support and easy-to-use deployment tools, allowing customers to focus on application development.
Customers who prefer to configure a custom O/S image can leverage the IOT-GATE-iMX8 Yocto BSP which includes Linux kernel 5.4, Yocto Project 3.0 and U-Boot boot-loader.
In addition, IOT-GATE-iMX8 supports popular IoT frameworks such as Docker, Microsoft Azure IoT and AWS Greengrass. OTA updates can be integrated using a pre-configured Mender Yocto layer.
CPU | i.MX8M Mini, quad-core ARM Cortex-A53, 1.8GHz |
RAM | Up to 4GB LPDDR4 |
Storage | Up to 64GB, eMMC flash, soldered on-board |
Up-to 64GB, eMMC flash, optional module | |
Network | 2x Ethernet ports |
WiFi 802.11ax | |
Bluetooth 5.1 BLE | |
LTE cellular modem | |
GPS / GLONASS | |
USB | 3x USB2.0, type-A connectors |
Serial | 1x serial console via UART-to-USB bridge, micro-USB connector |
1x RS485 (half-duplex) / RS232 port, terminal-block | |
I/O expansion | up-to 2x CAN / RS485 / RS232, isolated, terminal block |
4x digital inputs + 4x digital outputs, isolated, terminal block | |
RTC | Real time clock with back-up battery |
Input voltage | Unregulated 8V to 36V DC input |
Dimensions | 112 x 84 x 25 mm |
Enclosure | Aluminum housing |
Cooling | Passive cooling, fanless design |
Temp. range | -40C to 80C |
IOT-GATE-iMX8 and SBC-IOT-iMX8 are available now through CompuLab’s worldwide distribution channel and through direct sales (www.compulab.com).
IOT-GATE-iMX8 is offered at a variety of configurations starting from $114 for volume orders.
SBC-IOT-iMX8 is offered at a variety of configurations starting from $94 for volume orders.
Detailed ordering and pricing information is available at IOT-GATE-iMX8 and SBC-IOT-iMX8 product pages.
CompuLab is a leading designer and manufacturer of embedded computing products since 1992.
CompuLab products are embedded in digital signage, telecommunication systems, automotive devices, gaming systems, medical devices, aerospace and marine systems, and countless other applications.
CompuLab headquarters are located in Yokneam, Israel with offices in St. Petersburg, FL.
Igor Vaisbein
igor.vaisbein@compulab.co.il
+972-4-8290100
High performance, powerful graphics and extensive connectivity make CL-SOM-iMX8X an excellent solution for a very wide range of applications such as industrial HMI, building control, image processing systems, IoT gateways, medical devices and metering systems.
CL-SOM-iMX8X has been designed to bring out the full I/O capabilities of the highly versatile i.MX8X SoC. Peripheral interfaces include PCI Express, dual Gigabit Ethernet, USB ports, 4 UARTs, 3 CAN-FD ports and 96 GPIOs. Display connectivity is supported with two independent LVDS / MIPI-DSI interfaces. In addition, CL-SOM-iMX8X extends the i.MX8X I/O even further with on-board 802.11ac WiFi, Bluetooth 4.2 and 3 additional USB ports.
CL-SOM-iMX8X is offered with full industrial temperature range of -40C to 85C.
CL-SOM-iMX8X is provided with a full BSP and ready-to-run images for the Linux operating system. The CL-SOM-iMX8X BSP includes Linux kernel 4.14, Yocto Project SDK and U-Boot boot-loader.
To facilitate streamlined and rapid product development, CL-SOM-iMX8X is supported with the SB-iMX8X carrier-board and EVAL-iMX8X evaluation kit.
SB-iMX8X carrier-board has been designed for CL-SOM-iMX8X evaluation and application development. SB-iMX8X schematics, bill of materials and layout are available to be used as a reference design for a wide range of industrial use cases.
The EVAL-iMX8X eval-kit offered at $395, includes CL-SOM-iMX8X and SB-iMX8X hardware set, an optional LCD panel, PSU, cables and a technical support contract.
CPU | NXP i.MX 8QuadXPlus, quad-core ARM Cortex-A35, 1.2GHz |
Video Decode | 4k H.265, 1080p H.264, VP8, MPEG4, RealVideo |
Video Encode | 1080p H.264 |
GPU | GC7000Lite GPU, OpenGL 3.0, OpenCL 1.2 FP, OpenVG 1.1, Vulkan |
Real-Time MCU | ARM Cortex-M4F, 266 MHz |
RAM | Up-to 4GB LPDDR4 |
Storage | Up to 64GB of soldered eMMC |
Display | 2x LVDS / MIPI-DSI, 4 data lanes, up to 1080p60 |
Camera | MIPI-CSI, 4 data lanes |
Network | 2x Gigabit Ethernet |
Certified 802.11ac WiFi interface | |
Bluetooth 4.2 BLE | |
Audio | Up-to 1x I2S / SAI |
PCI Express | 1x PCIe |
USB | 1x USB2.0 OTG + 3x USB2.0 host ports |
UART | Up to 4x UART |
MMC/SD/SDIO | Up to 1x SD / MMC interface |
General I/O | Up to 3x I2C, 4x SPI, 3x CAN-FD, 96x GPIO |
ADC | 5x general-purpose ADC inputs |
RTC | Real time clock, powered by external battery |
Debug | JTAG debug interface |
Supply Voltage | 4.0V to 4.5V |
Connector | 204-pin SO-DIMM edge connector |
Dimensions | 38 x 68 x 5 mm |
Temp. range | -40C to 85C |
CL-SOM-iMX8X is available now through CompuLab’s worldwide distribution channels and through direct sales (www.compulab.com).
CL-SOM-iMX8X is offered at a variety of configurations starting from $73 for volume orders.
EVAL-iMX8X evaluation kit is offered at $395.
Detailed ordering and pricing information is available at the CL-SOM-iMX8X product page.
CompuLab is a leading designer and manufacturer of embedded computing products since 1992.
CompuLab products are used in digital signage, telecommunication, industrial automation, gaming, medical devices, aerospace and marine systems and countless other applications.
CompuLab headquarters are located in Yokneam, Israel with offices in St. Petersburg, FL.
For additional details please contact:
Igor Vaisbein
igor.vaisbein@compulab.co.il
+972-4-8290100
Yokneam, Israel 20-February-2019 – CompuLab introduces UCM-iMX8M-Mini – an ultra-miniature, cost effective System-on-Module, built around the new NXP i.MX8M Mini System-on-Chip family.
Measuring just 28 x 38 mm, UCM-iMX8M-Mini brings out the full capabilities of the i.MX8M Mini SoC, offering up-to 4GB RAM and 64GB eMMC, Gbit Ethernet, PCIe, 2 USB ports, 4 UARTs and up-to 85 GPIOs. Display and camera connectivity is supported with MIPI-DSI and MIPI-CSI interfaces. In addition, UCM-iMX8M-Mini features on-board WiFi 802.11ac and Bluetooth 4.2 interfaces implemented with a pre-certified module.
Miniature size, high performance video and graphics capabilities and highly power efficient design make UCM-iMX8M-Mini an ideal solution for a wide range of portable and space constrained applications such as:
UCM-iMX8M-Mini is offered with full industrial temperature range of -40C to 85C.
Software Support
UCM-iMX8M-Mini is provided with a full BSP and ready-to-run images for the Linux and Android operating systems. The UCM-iMX8M-Mini BSP includes Linux kernel 4.14, Yocto Project file-system and U-Boot boot-loader.
Evaluation and Design Support
To facilitate streamlined and rapid product development, UCM-iMX8M-Mini is supported with SB-UCMIMX8 carrier board and EVAL-UCM-iMX8M evaluation kit.
SB-UCMIMX8 carrier-board has been designed for UCM-iMX8M-Mini evaluation and application development. SB-UCMIMX8 schematics, bill of materials and layout are available for UCM-iMX8M-Mini customers to be used as a reference design for a wide range of industrial use cases.
EVAL-UCM-iMX8M evaluation kit includes UCM-iMX8M-Mini and SB-UCMIMX8 hardware set, 5” WXGA LCD panel, 5MP camera module, PSU, cables and a technical support contract.
Specifications
CPU | NXP i.MX8M Mini Quad ARM Cortex-A53, 1.8GHz |
NXP i.MX8M Mini Dual ARM Cortex-A53, 1.8GHz | |
NXP i.MX8M Mini DualLite ARM Cortex-A53, 1.8GHz | |
Video Decode | 1080p60 H.265, H.264, VP8, VP9 |
Video Encode | 1080p60 H.264, VP8 |
GPU | GC NanoUltra GPU, OpenGL ES 2.0, Open VG 1.1 |
Real-Time MCU | ARM Cortex-M4 |
RAM | Up-to 4GB LPDDR4 |
Storage | Up to 64GB of soldered eMMC |
Display | MIPI-DSI, 4 data lanes, up to 1920 x 1080 @60Hz |
Touchscreen | Capacitive touch-screen support through SPI and I2C interfaces |
Camera | MIPI-CSI, 4 data lanes |
Network | Gbit Ethernet |
Dual-band WiFi 802.11ac | |
Bluetooth 4.2 BLE | |
Audio | Up-to 3x I2S / SAI |
PCI Express | PCIe x1 Gen. 2.1 |
USB | 2x USB2.0 dual-role ports |
UART | Up to 4x UART |
MMC/SD/SDIO | 1x MMC/SD/SDIO interface |
General I/O | Up to 3x I2C, 3x SPI, 4x PWM, 85x GPIO |
RTC | Real time clock, powered by external battery |
Debug | JTAG debug interface |
Supply Voltage | 3.45V to 4.4V |
Connector | 2 x 100 pin, 0.4mm pitch |
Dimensions | 28 x 38 x 4 mm |
Temp. range | -40C to 85C |
Price and Availability
UCM-iMX8M-Mini is available now through CompuLab’s worldwide distribution channel and through direct sales (www.compulab.com).
UCM-iMX8M-Mini is offered at a variety of configurations starting from $54 for volume orders.
EVAL-UCM-iMX8M evaluation kit is offered at $385.
Detailed ordering and pricing information is available at the UCM-iMX8M-Mini product page.
About CompuLab
CompuLab is a leading designer and manufacturer of embedded computing products since 1992.
CompuLab products are used in digital signage, telecommunication, industrial automation, gaming, medical devices, aerospace and marine systems and countless other applications.
CompuLab headquarters are located in Yokneam, Israel with offices in St. Petersburg, FL.
For more details please contact:
Igor Vaisbein
igor.vaisbein@compulab.co.il
+972-4-8290100