View unanswered posts | View active topics It is currently Sun May 19, 2019 6:54 am

Reply to topic  [ 2 posts ] 
 Serial port settings 
Author Message

Joined: Mon Jun 22, 2015 9:21 pm
Posts: 1
Post Serial port settings
I have a serial device using settings: 9600 8N1 Xon/Xoff that I need to be able to receive data from with my Utilite. I am unable to get the serial setup correct to see this data in picocom, or any other terminal program. The settings are correct, and I know my device is working, as I can plus in a USB -> Serial and get the data on the Utilite. I do not have in depth knowledge of the Linux serial environment therefore any help woudl be appreciated.

Mon Jun 22, 2015 9:45 pm

Joined: Thu Sep 25, 2014 9:43 am
Posts: 37
Post Re: Serial port settings
The Utilite serial port works at 115200 baud.
You can get a serial acess using the screen command from any Linux distro:
screen /dev/ttyUSB0 115200

To end the remote session press Ctrl-A then K and Y.

Another solution is to use Putty, available in any OS. In the startup window select: Serial line: /dev/ttyUSB0 Speed: 115200 Connection type: Serial then Open.

Thu Jun 25, 2015 8:41 am
Display posts from previous:  Sort by  
Reply to topic   [ 2 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.