View unanswered posts | View active topics It is currently Sat Nov 17, 2018 2:11 am



Reply to topic  [ 12 posts ]  Go to page 1, 2  Next
 U-Boot v2015.07-cm-fx6-3 for Utilite is available 
Author Message

Joined: Thu Jul 12, 2012 10:02 am
Posts: 30
Post U-Boot v2015.07-cm-fx6-3 for Utilite is available
Updated U-Boot package is now available.
This new version includes improved USB keyboard support, a fix for SD Card detect on new Linux kernels for older Utilite units (SB-FX6m revision < 1.3), as well as new locations to load a splash screen from.

The new U-Boot can be downloaded through http://www.compulab.co.il/utilite-compu ... oot_Update.


Mon Oct 19, 2015 2:31 pm
Profile

Joined: Tue Mar 25, 2014 5:56 pm
Posts: 109
Post Re: U-Boot v2015.07-cm-fx6-3 for Utilite is available
Thanks for the new U-boot version, update went smoothly!


Mon Oct 19, 2015 5:30 pm
Profile

Joined: Thu Nov 14, 2013 12:48 pm
Posts: 41
Post Re: U-Boot v2015.07-cm-fx6-3 for Utilite is available
404 not found for the image file?


Thu Oct 22, 2015 2:48 am
Profile

Joined: Fri Jan 02, 2015 5:07 am
Posts: 17
Post Re: U-Boot v2015.07-cm-fx6-3 for Utilite is available
"Not Found
The requested URL /download/utilite/u-boot/utilite-updater.tar.bz2
was not found on this server.
Additionally, a 404 Not Found error was encountered
while trying to use an ErrorDocument to handle the request."


Fri Oct 23, 2015 8:13 am
Profile

Joined: Tue Mar 25, 2014 5:56 pm
Posts: 109
Post Re: U-Boot v2015.07-cm-fx6-3 for Utilite is available
Try this one:
http://www.compulab.co.il/utilite-compu ... er.tar.bz2


Sat Oct 31, 2015 3:16 pm
Profile

Joined: Fri Dec 13, 2013 1:41 pm
Posts: 19
Post Re: U-Boot v2015.07-cm-fx6-3 for Utilite is available
Does this work on arch ?


Sat Nov 21, 2015 7:24 pm
Profile

Joined: Tue Mar 25, 2014 5:56 pm
Posts: 109
Post Re: U-Boot v2015.07-cm-fx6-3 for Utilite is available
Yes it does.

The default settings work out-of-the-box if you have renamed the boot image to the Utilite standard way as "/boot/uImage-cm-fx6".

If you have it like a Arch linux way "/boot/uImage" you should probably make a change to the Uboot environment after update, check the section "U-Boot Configuration":
http://archlinuxarm.org/platforms/armv7 ... le/utilite


Sun Nov 22, 2015 2:42 pm
Profile

Joined: Fri Dec 13, 2013 1:41 pm
Posts: 19
Post Re: U-Boot v2015.07-cm-fx6-3 for Utilite is available
I ran it once but then had not mtd-utils so couldn't refresh the environment. Then intalled it and now I got this.
Code:
[root@utilite utilite-updater]# ./utilite-bootloader-update.sh

CompuLab CM-FX6 (Utilite) boot loader update utility 2.3 (Oct 18 2015)

>> Checking for utilities...
>> ...Done
>> Checking that board is CM-FX6 (Utilite)...
>> ...Done
Please input firmware file path (or press ENTER to use "cm-fx6-firmware"):
>> Looking for boot loader image file: cm-fx6-firmware
>> ...Found
>> Looking for SPI flash: mtd0
>> ...Found
>> Current U-Boot version in SPI flash:   U-Boot 2015.07-cm-fx6-3 (Sep 02 2015 - 13:30:11 +0300)
>> New U-Boot version in file:      U-Boot 2015.07-cm-fx6-3 (Sep 02 2015 - 13:30:11 +0300) (500K)
>> Proceed with the update?
1) Yes
2) No
#? 1
** Do not power off or reset your computer!!!
>> Erasing SPI flash...
Erasing 4 Kibyte @ bf000 -- 100 % complete
>> ...Done
>> Writing boot loader to the SPI flash...
...
>> ...Done
>> Checking boot loader in the SPI flash...
.
>> ...Done
>> Boot loader update succeeded!

** Resetting U-Boot environment will override any changes made to the environment!
>> Reset U-Boot environment (recommended)?
1) Yes
2) No
#? 1
Cannot parse config file: Invalid argument
Error: environment not initialized
Cannot parse config file: Invalid argument
!! U-Boot environment reset failed!
[root@utilite utilite-updater]#


I am running this on an old arch image (Johan's) and I am planning to put the stock arch. I don't know how do I proceed?

Is there any config file I should put somewhere?


Wed Nov 25, 2015 4:23 pm
Profile

Joined: Sat Jan 18, 2014 8:59 pm
Posts: 187
Location: Hamburg, Germany
Post Re: U-Boot v2015.07-cm-fx6-3 for Utilite is available
You can 'reset' the u-boot environment to the built-in default within u-boot by
Code:
env -a
saveenv


Wed Nov 25, 2015 4:32 pm
Profile

Joined: Fri Dec 13, 2013 1:41 pm
Posts: 19
Post Re: U-Boot v2015.07-cm-fx6-3 for Utilite is available
This is strange:

Code:
[root@utilite utilite-updater]# env -a
env: invalid option -- 'a'
Try 'env --help' for more information.


Code:
[root@utilite utilite-updater]# env --help
Usage: env [OPTION]... [-] [NAME=VALUE]... [COMMAND [ARG]...]
Set each NAME to VALUE in the environment and run COMMAND.

Mandatory arguments to long options are mandatory for short options too.
  -i, --ignore-environment  start with an empty environment
  -0, --null           end each output line with NUL, not newline
  -u, --unset=NAME     remove variable from the environment
      --help     display this help and exit
      --version  output version information and exit

A mere - implies -i.  If no COMMAND, print the resulting environment.

GNU coreutils online help: <http://www.gnu.org/software/coreutils/>
Full documentation at: <http://www.gnu.org/software/coreutils/env>
or available locally via: info '(coreutils) env invocation'
[root@utilite utilite-updater]#


Maybe is
Code:
env -i
the same?

Plus I don't seem to have seveenv installed.

Code:
[root@utilite utilite-updater]# which saveenv
which: no saveenv in (/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/bin/core_perl)
[root@utilite utilite-updater]#


To which package it belongs?

The following is the output of printenv
Code:
[root@utilite utilite-updater]# printenv
SHELL=/bin/bash
TERM=xterm
USER=root
SUDO_USER=angelo
SUDO_UID=1000
USERNAME=root
MAIL=/var/mail/root
PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/bin/core_perl
PWD=/home/angelo/utilite-updater
LANG=en_US.UTF-8
SHLVL=1
SUDO_COMMAND=/bin/bash
HOME=/root
LOGNAME=root
SUDO_GID=100
_=/usr/bin/printenv
OLDPWD=/root



Wed Nov 25, 2015 4:43 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 12 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.