View unanswered posts | View active topics It is currently Wed Dec 19, 2018 3:23 pm



Reply to topic  [ 3 posts ] 
 Utilite Standard stops at U-boot & doesn't boot from SD card 
Author Message

Joined: Fri Aug 15, 2014 9:57 am
Posts: 37
Post Utilite Standard stops at U-boot & doesn't boot from SD card
Hello !

I have two Utilite Standard models. I inserted the 8 GB SDHC Micro SD card from a working Utilite Standard into another Utilite Standard device, but all I am able to see over the Console cable is the U-boot initialization screen, and then it doesn't proceed into booting up the Linux kernel. I am not sure, either U-boot has been previously modified on this device in some way or if the SD card slot inside is broken and not sensing the Micro SD card at all ? What could I try ? Here is the output of the console U-boot screen with the Micro SD card inserted:

U-Boot 2009.08-cm-fx6-0.87+tools (Oct 06 2013 - 13:46:27)

CPU: Freescale i.MX6 family TO6.4 at 792 MHz
Temperature: 27 C, calibration data 0x5774e469
mx6q pll1: 792MHz
mx6q pll2: 528MHz
mx6q pll3: 480MHz
mx6q pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 66000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 264000000Hz
emi_slow clock: 29333333Hz
ddr clock : 528000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
nfc clock : 11000000Hz
Board: CM-FX6:[ POR ]
Boot Device: SPI NOR
I2C: ready
RAM Configuration:
Bank #0: 10000000 1 GB
Bank #1: 80000000 1 GB
NAND: No NAND device found!!!
0 MiB
MMC: FSL_USDHC: 0,FSL_USDHC: 1,FSL_USDHC: 2
JEDEC ID: 0xbf:0x25:0x41
Reading SPI NOR flash 0xc0000 [0x2000 bytes] -> ram 0x17e030e0
SUCCESS

In: serial
Out: serial
Err: serial
Net: got MAC address from IIM: 00:00:00:00:00:00
FEC0
Hit any key to stop autoboot: 0


Wed Jan 06, 2016 9:29 am
Profile

Joined: Fri Aug 15, 2014 9:57 am
Posts: 37
Post Re: Utilite Standard stops at U-boot & doesn't boot from SD
Please disregard or delete this post as I managed to find the solution.


Wed Jan 06, 2016 3:55 pm
Profile

Joined: Mon Oct 01, 2018 8:16 am
Posts: 1
Post Re: Utilite Standard stops at U-boot & doesn't boot from SD
I'm getting the same outcome. What's the solution here, Yang? I can't figure it out.


Mon Oct 08, 2018 10:18 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 3 posts ] 

Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.