Home   Products  Developer  Prices  Sales & Support   News    About CompuLab

Products
Computer-on-module
 CM-A510
 CM-iAM
 CM-iGLX
 CM-iTC (new)
 CM-T3517
 CM-T3530
 CM-T3730 (new)
 CM-X270
 CM-X300
 CM-XAM
Handheld / mobile
 EM-T3530 (new)
 EM-X270
 Exeda
Single board computers
 SBC-A510
 SBC-FITPC2
 SBC-FITPC2i
 SBC-iAM
 SBC-iGLX
 SBC-iTC (new)
 SBC-T3517
 SBC-T3530
 SBC-T3730 (new)
 SBC-X270
 SBC-X300
 SBC-XAM
Industrial PC
 fit-PC2
 fit-PC2i
 fit-PC1

Related Topics:
 - CoM Comparison
 - SBC Comparison
 - Evaluation Kits
 - Industrial Temperature
 - RoHS Compliance
 - Life Cycle

 

 

 SBC-T3530 Board          

SBC-T3530 Highlights
Single Board Computer implemented by the combination of a CM-T3530 module and a SB-T35 baseboard.
Texas Instruments OMAP3530 CPU @ 720 MHz, 256 MB mDDR,  512 MB Flash Disk
WLAN / WiFi 802.11b/g interface
1400 x 1050 graphics controller with interfaces for LVDS, RGB and DVI
TV-out with S-Video interface
Camera interface
3 serial ports
Host and slave USB ports
Touchscreen interface
Keypad and GPIO connectors
Sound codec with stereo output and line input
Two 100 Mbps Ethernet ports
MMC / SD / SDIO socket
RTC with back-up battery
Lithium-ion battery charger
 
Note: some of above specified features are optional

The SBC-T3530 is a small single board computer based on the Texas Instruments OMAP3530 processor. It is implemented by a CM-T3530 module providing most of the functions, in combination with SB-T3530 carrier board providing connectors and several additional features. The rich feature set of the SBC-T3530 is customizable according to the price / performance targets of the user's application. 

OMAP3530 processor of SBC-T3530 combines two CPU cores in single package - an advanced Cortex-A8 ARM CPU for running operating system and application code, and TMS32064x DSP for dedicated video processing. Low voltage Mobile DDR enables very low power consumption in regular operation and in standby. 

Power supply options of the SBC-T3530 enable its integration in mobile applications powered by a rechargeable battery. Charger and battery management support is provided on-board.

For more information, see the Developer Resources page.


Block Diagram

 

SBC-T3530 Features

The "SB Option" column specifies the P/N code of SB-T35 carrier board required to have the particular feature. The "CM Option" column specifies the P/N code of CM-T3530 required to have the particular feature. SBC-T3530 content is the combination of features provided by the attached CM-T3530 and the features implemented on the SB-T35. To have the particular feature, both the CM and SB options of that feature must be implemented.
"+" means that the feature is always available, regardless of P/N code.

Feature Specification SB
Option		 CM
Option
CPU
SDRAM
Flash Disk		 See Feature List of CM-T3530 module +  
COM-A RTS/CTS controls, 1.8V levels, 100-mil header + +
COM-B RTS/CTS controls, 1.8V levels, 100-mil header + +
COM-C Rx/TX only, RS-232, ultra mini serial conn. + +
Ethernet CM-T3530 100 Mbps Ethernet port.  LAN9220 controller. RJ-45 connector and activity LED's + E
SB-T35 100 Mbps Ethernet port.  LAN9220 controller. RJ-45 connector and activity LED's E +
LCD Panel TD035STEE1 (3.5”, 480x640, TFT) panel support. 60-pos FPC connector for direct interface to TD035STEE1 + +
STN and TFT panel support. 40-pos FPC connector for direct interface to certain TFT panels + +
DVI DVI monitor support, HDMI connector LD +
LVDS 4 pair LVDS panel interface, 100-mil header LL +
TV-out  Composite video, S-Video connector + +
USB 2.0 OTG USB 2.0 OTG port, USB mini-AB connector + +
USB 2.0 host

Two USB 2.0 host ports, 480 Mbps. Implemented by USB 2.0 high-speed hub. Type-A connector

+ U
One USB 2.0 high speed port, 480 Mbps. Implemented by dedicated USB 2.0 high-speed controller), 100-mil header +
GPIO 12 lines on 100-mil header. + +
Touch Panel TSC2046 touchscreen controller for resistive panels. Interface to LCD panel + I
Sound I/O I2S compliant audio codec, Line input and Speakers (stereo) jacks + +
RTC Battery Real time clock component on CM-T3530, supplied by lithium battery on SB-T35 + +
WiFi WiFi interface provided by CM-T3530 + W
SDIO / MMC MMC / SD / SDIO support including SDHC up to 32GB. Standard full-size SD socket.  + +
Camera interf 24-pos FPC connector for direct interface to certain camera modules  + +
Battery management  Charging and supervision support for Lithium-ion polymer batteries  S +

Electrical, Mechanical and Environmental Specifications

Supply Voltage High efficiency switched power supply. Support of sleep mode.
Unregulated 3.3 to 4.2 volt input from battery or regulated 5V from wall adapter
Power Consumption 1W to 3W in full activity, depending on CPU speed and selected features
Below 50mW in sleep mode
Dimensions 166 mm (L) x 82 mm (W) x 23 mm (H)
Weight 107 gram
Operation temp (case)
Commercial:    0o to 70o C
Extended: -20o to 70o C
Industrial: -40o to 85o C. Click for availability note
Storage temperature -40o to 85o C
Relative humidity 10% to 90% (operation)
05% to 95% (storage)
Shock 50G / 20 ms
Vibration 20G / 0 - 600 Hz
MTBF > 100,000 hours

For more information see:
- SB-T35 Reference Guide
- Developer Resources

 
   Contact      Copyright (C) CompuLab 1999-2011