|
|
|
CM-iAM
Computer-On-Module
|
|
|
|
CM-iAM
Top
|
CM-iAM
Bottom
|
| CM-iAM
Highlights |
|
|
The
CM-iAM packs
up-to-date year 2009 technologies into the most compact, lightweight
PC-on-module available in the market. Its on-board resources suffice to
smoothly run operating systems such as Linux, Windows XP and Windows 7, on
credit-card sized board capable running on small battery. Board's
specifications, in addition to its low cost, make it an ideal building block for any
embedded application.
The feature set of the
CM-iAM comprises a 32-bit X86-compatible CPU, DDR2, Flash Disk and vital
computing peripherals. For embedded applications, the CM-iAM provides a
variety of display interfaces, PCIexpress bus, two 1000Mbit Ethernet ports,
serial port, general purpose I/O lines and many other essential functions.
The user interface is supported by an enhanced graphics controller, USB
interface for keyboard / mouse and Audio system.
See O/S Support Coverage Map
For more information, see Developer
Resources page
Also see other Atom-based
products available from CompuLab
|
Block Diagram
CM-iAM Features
"Option" column
specifies the configuration code required to have the particular feature.
"+" means that the feature is available always.
CPU, Memory and Busses
|
Feature
|
Specifications
|
Option
|
|
CPU
|
Intel Atom Processor: Z530 - 1.6GHz / 533MHz FSB, or Z510 - 1.1GHz / 400MHz FSB. L2-512KB
(dynamic sizing), L1- 32KB IC, 24KB DC. Intel Deep Power Down
(C6) technology support
|
C
|
|
DRAM
|
512 / 1024 / 2048 MB DDR2, 400 / 533
MHz, 64-bit
|
D
|
|
BIOS Flash
|
1 MB, on-board
reprogrammable
|
+
|
|
Flash Disk
|
1 - 4 GB, more in
future. Up to 10 MB/s transfer rate.
|
N
|
|
External Busses
|
PCIexpress, LPC
|
+
|
|
PCIexpress bus
|
PCI Express Base
Specification, Revision 1.0a. One or two lanes.
note: second lane is shared with optional second ethernet controller
|
+
|
|
LPC bus
|
Host, 33 MHz, Intel LPC
v1.0 compatible
|
+
|
Peripherals
|
Feature
|
Specifications
|
Option
|
|
Graphics
Controller
|
Resolution up to 1920 x
1080 x 32 bpp frame buffer in system memory, 2D, 3D graphics accelerator
and multimedia accelerator optimized for HD video.
|
+
|
|
Display Interface
|
LCD – 18 bpp parallel
RGB for TFT panels
LVDS – 24 bpp, 4 data and 1 clk pairs for TFT panels
SDVO – can be directly connected to DVI / HDMI / VGA transmitters
|
L
+
+
|
|
USB
|
6 Host USB 2.0 ports,
480 Mbps, EHCI / UHCI compliant
|
+
|
|
Serial Port
|
UART's, full serial
port with modem controls, RS232 levels
|
S
|
|
GPIO
|
6 lines dedicated + 2
lines shared
Additional 7 dedicated GPIO lines
|
+
S
|
|
Hard Disk Interf.
|
SATA-II, using Marvell
88SA8052
|
Y
|
|
Ethernet
|
Two 1000 Mb/s ports,
Activity LED's. Using Realtek RTL8111 controllers.
|
E
|
|
Audio
|
IDT 92HD83 codec,
HD audio interface, stereo microphone and line inputs, 60 mW output
for 32 Ohm headphones / active speakers, 5.1 channel SPDIF output.
|
A
|
|
RTC
|
Real Time Clock,
powered by external lithium battery
|
+
|
|
SDIO
|
One 4-bit and one 8-bit
SDIO ports
|
+
|
|
Watchdog
|
Wide range
programmable watchdog timer
|
+
|
Electrical, Mechanical and
Environmental Specifications
|
Supply Voltage
|
5 volt
|
|
Active
power consumption
|
4 - 6
W, depending on configuration and CPU speed
|
|
Dimensions
|
65 x 75 x 8 mm
|
|
Weight
|
35
gram
|
|
MTBF
|
>
100,000 hours
|
|
Operation
temperature (case)
|
|
Commercial:
|
0o to 70o C
|
|
Extended:
|
-20o
to 70o C
|
|
Industrial:
|
-40o
to 85o C. Click for availability note
|
|
|
Storage
temperature
|
-40o
to 85o C
|
|
Relative
humidity
|
10% to
90% (operation)
05% to 95% (storage)
|
|
Shock
|
50G /
20 ms
|
|
Vibration
|
20G / 0
- 600 Hz
|
|
Connectors
|
2 x 140
pin, 0.6 mm. Insertion / removal up to 50 cycles
|
For more information see:
- CM-iAM
Reference Guide
- Developer Resources
|
